Recycling & waste processing.Dirt, dust and impacts.
Sorting lines, grabs and presses work with dirty, sharp and heavy material. The cable guidance has to withstand impacts and dirt and still keep running.
Kabelmanagement in recycling & waste processing
What does recycling & waste processing demand from industrial cable management?
Typical: Sorting robots · Waste grabs and cranes · Balers · Shredders · Optical sorters
- 01
Contamination
Dust, moisture and debris on the guide.
- 02
Shocks
Falling material hits the carrier.
- 03
Heavy movements
Grippers and presses with large forces.
- 04
Wear
Abrasive material shortens service life.
Products
What we supply for recycling & waste processing
Per product why it fits here, and what we do for you alongside it. From advice to installation, with one point of contact.
Tsubaki Kabelschlepp
Plastic cable carriers
- Why it fits
- For machine building, handling and automation.
- What we do
- We calculate the series and supply the carrier fully assembled from Ruurlo.
Tsubaki Kabelschlepp
Steel cable carriers
- Why it fits
- For cranes, steel industry, offshore and machines with large self-supporting lengths.
- What we do
- We calculate unsupported length and load, and install on site.
Reiku
Robot dress packs
- Why it fits
- A dress pack protects and guides everything that goes to a robot's tooling: welding current, air, cooling water, signals and data.
- What we do
- Our robotics division assembles the package and mounts it on your robot.
Tsubaki Kabelschlepp · TRAXLINE
Flexible cables (TRAXLINE)
- Why it fits
- TRAXLINE cables from Tsubaki Kabelschlepp are developed for continuous movement in cable carriers.
- What we do
- We select the cable by bending cycles and radius and cut and assemble it to length.
Reiku
Protective hoses for robots
- Why it fits
- Corrugated Reiku protective hoses around the cable and hose package of an industrial robot.
- What we do
- We choose size and material and supply the complete package per robot axis.
Reiku
Holders and fixings
- Why it fits
- Reiku clamps, clamping jaws, ball joints and swivel flanges that guide, hold or rotate the protective hose on the robot.
- What we do
- We match holders and clamps to your robot and hose size.
In practice
Similar projects
Featured project
Maximum performance at Tata Steel through predictive maintenance of cable carriers
Our engineers are at Tata Steel in IJmuiden almost every week to monitor the condition of the cable carriers. We schedule replacements during regular maintenance stops, so unexpected failures are prevented.
- Customer
- Tata Steel
- Location
- IJmuiden
- Sector
- Steel & heavy industry
- Solution
- Service
- Environment
- Steel industry, fine dust, heat and moisture
- Assembly
- Replacement during regular maintenance stops
Trusted by
Downloads and tools
Everything to take it further yourself
The recycling & waste processing flyer to share, and the tools to calculate and choose yourself.
Flyer · pdf
Cable management for recycling & waste processing
All solutions for this industry on one A4, to share with your team.
Free
drawing check.
We look along with you.
Send your machine drawing or photo, our engineers will take a look within 1 working day. A sketch, a STEP model or a photo of the machine is enough to get started.
What you get back
- Which cable carrier, dress pack or cables suit your application
- Points of attention in the layout or installation
- A proposal or the logical next step
Bas EgberinkCable Carriers Specialist. Your drawing goes straight to him.
Frequently asked questions